Equipment Introduction
The cable oscillation wave partial discharge test system is a new type of testing equipment used for field detection and condition diagnosis of cables. It the characteristics of simplicity, practicality, small size, convenient transportation, non-destructive testing of cables under AC voltage conditions, and diversified insulation performance detection and evaluation means. system adopts a combination of damped AC voltage (DAC) withstand voltage test and partial discharge detection, which provides an effective means to discover potential defects in cable insulation
The system can produce damped AC voltage of up to 30kV during the test, combined with advanced system hardware and system software for diagnosis, main technical features include:
Latest semiconductor technology;
Latest laser control technology;
Advanced digital signal processor and filtering technology;
Advanced wireless network control technology
|
Serial number |
project |
Technical indicators |
|
1 |
Power supply |
220 VAC±10%, 50Hz |
|
2 |
Oscillating wave output maximum voltage |
30 kV (peak value) |
|
3 |
Oscillation frequency range |
20Hz ~500Hz |
|
4 |
Test cable length range |
200m~20km |
|
5 |
High voltage charging current |
10 mA |
|
6 |
High-voltage switch |
Triggering method: Laser-triggered high-voltage switch |
|
7 |
High voltage switch control |
On-time: 1µs |
|
Switch on-resistance: less than 1Ω |
||
|
Fiber optic communication |
||
|
8 |
Partial discharge measurement range |
1pC~100nC |
|
9 |
Partial discharge level detection and bandwidth |
Compliant with International Electrotechnical Commission (IEC) standard 60270 |
|
10 |
Partial discharge positioning bandwidth |
150kHz~45MHz automatic adjustment |
|
11 |
Partial discharge positioning measurement accuracy |
1% of total cable length (minimum resolution 2 m) |
|
12 |
Dielectric loss measurement range |
0.1%~10% |
|
13 |
Real-time sampling rate of partial discharge |
100MHz |
|
14 |
Partial discharge sampling storage depth |
32MB (can record data length of 300ms ) |
|
15 |
Control method |
Wireless control, wired control |
|
16 |
Partial discharge calibration mode |
Automatic/Manual |
|
17 |
Boost mode |
Programmable boost/manual boost |
|
18 |
Time-domain pulse reflection positioning connector function in calibration mode |
Automatic locking connector position |
We provide you with free consultation services
Engineers provide guidance for installation and commissioning
Technicians can provide on-site maintenance services and receive regular training
Perfect technical consulting service system
Send your message to us:
Contact Us
Address: China Optics Valley No. 1, Fenghuangyuan 2nd Road, Donghu High-tech Development Zone, Wuhan City
whmoen@163.com
24-Hour service hotline
15997412136
Unified service hotline
400-017-7185
Follow Us
